BCNet-CX is an Ethernet communication processor designed to meet the increasing informatization needs of factory equipment (equipment network monitoring and production management), and is used for Omron CPM1A/CPM2A/CQM1
The Ethernet data acquisition of the series PLC is very convenient to build a production management system.
BCNet-CX rail type is suitable for:
PLC with 20-pin interface: CPM1A/2A/CQM1 series PLC, equipped with a data transfer cable CQM1-CIF02, requires an external 24VDC power supply.
PLC with 10-pin interface: CPM2C/CQM1 and other series PLC, equipped with a data transfer cable CS1W-CN226, requires an external 24VDC power supply.
- Plug and play, BCNet-CX can directly obtain power from the PLC communication port, or external 24VDC power supply.
- Integrate the WEB server, through the web page, you can set the device parameters, and set the login protection password to prevent tampering with the configuration data.
- Automatically match PLC and HMI serial parameters without additional configuration. The PLC program does not need to be modified and set up.
- Integrate ModbusTCP server, support FC1, FC3, FC5, FC6, FC15, FC16, and the Modbus data area corresponds to the device address of Omron PLC.
- By using ModbusTCP communication protocol or port mapping, programming in high-level languages (such as VB, VC, C#, etc.) can be realized, data communication with Omron PLC can be realized, and it is convenient to develop production management system.
- Support firmware update on the user side through Ethernet, provide firmware with more functions for free, buy hardware once, and upgrade permanently.
|Describe||Omron PLC Ethernet Communication|
Number of TCP/UDP connections
|IEEE 802.3 compatible, Link/Active indicator, line sequence adaptive, support Auto-MDIX|
RJ45 female socket
|X1 interface (connected to PLC)|
DB9 communication male port
|X2 interface (with HMI)|
DB9 communication female port
IFIX, INTOUCH, etc.
|Diagnostics and parameter setting||IE browser, default 192.168.1.178, BCDevice|
|The communication port can directly take power or external 24VDC|
|Working humidity||90% non-condensing|
|Installation method||Plug and Play|
|Factory aging||The 60-degree aging box runs for 168 hours, and the power is turned on and off 500 million times|
|Communication stability||Continuous communication with PLC for 30 days, 130 million times of communication with 0 errors|