BCNet-FJ

BCNet-FJ is an economical Ethernet communication processor, which is designed to meet the increasing demands of factory equipment informatization (equipment network monitoring and production management). It is used for Ethernet data acquisition of Fuji SPB/NB series PLCs. , which is very convenient to build a production management system. The PLC of Fuji WSZ series selects BCNet-FB.
BCNet-FJ adopts a modular design and is equipped with a communication line when it leaves the factory. It does not occupy the PLC programming port, that is, while the programming software/host computer software monitors the PLC data through the Ethernet, the touch screen can communicate with the PLC through the multiplexing interface X2.

BCNet-FJ features:

  1. Installed on a 35mm guide rail, connected to the programming port of the PLC through a communication cable, and an external 24VDC power supply is required.
  2. Integrate a WEB server, through the web page, you can set device parameters and run diagnostics, and set a login protection password to prevent tampering with configuration data.
  3. Self-adaptive to the communication parameters of Fuji SPB series PLC programming port, no additional settings are required.
  4. Integrated ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, Modbus data area is automatically mapped to the data area of ​​Fuji SPB series PLC.
  5. Using ModbusTCP, it can realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with Fuji SPB series PLC, and facilitate the development of production management system.
  6. The SCADA (upper configuration software) supporting OPC channel communicates with Fuji SPB series PLC in OPC mode.
  7. Support up to 6 PCs to collect PLC data at the same time.
  8. Support firmware update on the user side through Ethernet, provide firmware with more functions for free, purchase hardware once, and upgrade permanently.

Application

Technical Parameter

Product numberBCNet-FJ
DescribeFuji SPB/NB Series PLC Ethernet Communication Processor
ColorMetallic Black
Status DisplayPwr,Bus
Ethernet interface
Interface Type
Transmission rate
Protocol support
IEEE 802.3 compatible, Link/Active indicator, line sequence adaptive, support Auto-MDIX
RJ45 female socket
10/100Mbps
Modbus TCP
Number of TCP connections6
X1 interface (connected to PLC)
Interface Type
Transmission rate
Protocol support
RS422
Terminals
9.6K, 19.2K, 38.4K, 57.6K, 115.2K
programming port
X2 interface (with HMI)
Interface Type
Transmission rate
Protocol support
RS422
Terminals
9.6K, 19.2K, 38.4K, 57.6K, 115.2K
programming port
Configuration Software
OPC software
Kingview, 3D Force Control, etc.
KepWare OPC
Diagnostics and Parameter settingIE browser, default 192.168.1.178, BCDevice
Power supply
Voltage type
Get power from the communication port of PLC or External 24VDC
24VDC/100mA
Operating temperature0~60℃
Working humidity90% non-condensing
Installation method35mm rail installation
Electromagnetic Compatibility2014/30/EU
Anti-vibration4.5mm/30Hz/10Min
ESD6KV
Factory agingThe 60-degree aging box runs for 168 hours, and the power is turned on and off 500 million times
Communication stabilityContinuous communication with PLC for 30 days, 130 million times of communication with 0 errors
CertificationCE Certification
Dimensions (LWH)90*24*65mm
Weight100g

Leave a Comment