Mitsubishi PLC Communication Ethernet on Weinview Touch Screen

by

Use WEINVIEW MT8102(ie) touch screen to monitor the data of 1 FX2NPLC and 1 Q00U PLC through Ethernet.

Device hardware

MITSUBISHI PLC(FX2N), MITSUBISHI PLC(Q00U), WEINVIEW MT8102(ie) touch screen, BCNet-FX, BCNet-Q

Program implementation introduction

  1. Hardware connection

1) Connect BCNet-FX to FX2NPLC;

2) Connect BCNet- to Q00UPLC;

3) Connect the network ports of BCNet-FX and BCNet-Q to the touch screen and computer through the switch.

  1. BCNet communication module parameter configuration

1) BCNet-FX parameters, as shown in the figure, the IP address of the module: 192.168.1.176, the port number: 5551;

2) BCNet-Q parameters, as shown in the figure, the IP address of the module: 192.168.1.177, the port number: 5002;

  1. Touch screen parameter configuration

1) Touch screen to select MT8102 series;

2) Add local PLC, select FX3U(Ethernet)

3) Add local PLC, select QJ7E71(Ethernet)

  1. Demonstration of touch screen monitoring screen

Leave a Comment