BCNet-MP

BCNet-MP is an economical Ethernet communication processor. It is designed to meet the increasing information requirements of factory equipment (equipment network monitoring and production management). It is used for Ethernet data acquisition of Yaskawa MP series PLC. It is convenient to build a production management system.
BCNet-MP does not occupy the PLC programming port, that is, while the programming software/host computer software monitors the PLC data through Ethernet, the touch screen can communicate with the PLC through the multiplexing interface X2.

BCNet-MP function

  1. Directly plug into the DSUB9 pin female port of Yaskawa PLC, no external 24VDC power supply is required.
  2. Integrate a WEB server, through the web page, you can set device parameters and run diagnostics, and set a login protection password to prevent tampering with configuration data.
  3. Self-adaptive to Yaskawa MP series PLC communication parameters, no additional settings are required.
  4. Integrated ModbusTCP server, support FC1, FC2, FC3, FC4, FC5, FC6, FC15, FC16, the Modbus data area is automatically mapped to the data area of ​​Yaskawa MP series PLC.
  5. Using ModbusTCP, it can realize high-level language (such as VB, VC, C#, etc.) programming, realize data communication with Yaskawa MP series PLC, and facilitate the development of production management system.
  6. SCADA (upper configuration software) supporting OPC channel communicates with Yaskawa MP series PLC in OPC mode.
  7. Support up to 6 PCs to collect PLC data at the same time.
  8. Support firmware update on the user side through Ethernet, provide firmware with more functions for free, purchase hardware once, and upgrade permanently.

Application

Technical Parameter

Product numberBCNet-MP
DescribeYaskawa MP series PLC Ethernet communication processor
ColorMetallic Black
Status DisplayPwr,Bus
Ethernet interface
Interface Type
Transmission rate
Protocol support
IEEE 802.3 compatible, Link/Active indicator, line sequence adaptive, support Auto-MDIX
RJ45 female socket
10/100Mbps
Modbus TCP
Number of TCP connections6
X1 interface (connected to PLC)
Interface Type
Transmission rate
Protocol support
RS232
DB9 male socket
9.6K, 14.4K, 19.2K, 28.8K, 38.4K, 48K, 57.6K, 76.8K
Programming port, MEMBUS
X2 interface (with HMI)
Interface Type
Transmission rate
Protocol support
RS232
DB9 male socket
9.6K, 14.4K, 19.2K, 28.8K, 38.4K, 48K, 57.6K, 76.8K
Programming port, MEMBUS
Configuration Software
OPC software
Kingview, 3D Force Control, etc.
KepWare OPC
Diagnostics and Parameter settingIE browser, default 192.168.1.178, BCDevice
Power supply
Voltage type
Communication port gets power or External 24VDC
24VDC/100mA
Operating temperature0~60℃
Working humidity90% non-condensing
Installation method35mm rail installation
Electromagnetic Compatibility2014/30/EU
Anti-vibration4.5mm/30Hz/10Min
ESD6KV
Factory agingThe 60-degree aging box runs for 168 hours, and the power is turned on and off 500 million times
Communication stabilityContinuous communication with PLC for 30 days, 130 million times of communication with 0 errors
CertificationCE Certification
Dimensions (LWH)65*30*17mm

Leave a Comment