BCNet-SC

BCNet-SC is an Ethernet communication processor specially used for Schneider PLC,
It is suitable for data acquisition of Schneider Quantumn/Premium/TSX Micro/Twdio/M200/M218/M221/M241/M238/M251/M258/M340 series PLC.
BCNet-SC adopts a modular design and does not occupy the PLC programming port, that is, while the programming software/host computer software monitors the PLC data through Ethernet, the touch screen can communicate with the PLC through the multiplexing interface X2.

BCNet-SC Features:

  1. Realize the conversion between ModbusRTU serial protocol and ModbusTCP Ethernet protocol, non-transparent transmission;
  2. Support full-duplex asynchronous communication mode, high efficiency and fast speed;
  3. Compatible with half-duplex communication mode, wide application range;
  4. Support 6 PCs to communicate at the same time;
  5. Support all kinds of host computer software and touch screen, and access device data through ModbusTCP;
  6. The serial port supports RS232/485 interface mode, the communication port is multiplexed, and the baud rate can be selected from 9600bps to 115200bps;
  7. Support programming through high-level languages ​​(such as VB, VC, C#, etc.) to realize data communication with Schneider PLC;
  8. Special parameter configuration and testing tools;
  9. Support WEB page parameter configuration and firmware upgrade.

Application

Technical Parameter

Product numberBCNet-SC
DescribeSchneider PLC Ethernet Communication Processor
ColorMetallic Black
Status DisplayPwr,COM1,COM2,Link
Ethernet interface
Interface Type
Transmission rate
Protocol support
IEEE 802.3 compatible, Link/Active indicator, line sequence adaptive, support Auto-MDIX
RJ45 female socket
10/100Mbps
Modbus TCP
Number of TCP connections6
X1 interface (connected to PLC)
Interface Type
Transmission rate
Protocol support
terminal
RS485, RS232 optional
9.6K~115.2Kbps
Modbus RTU/ASCII
X2 interface (with HMI)
Interface Type
Transmission rate
Protocol support
terminal
RS485, RS232 optional
9.6K~115.2Kbps
Modbus RTU/ASCII
Configuration Software
OPC software
Kingview, 3D Force Control, etc.
KepWare OPC
Diagnostics and Parameter settingIE browser, default 192.168.1.178, BCDevice
Power supply
Voltage type
External 24VDC
24VDC/100mA
Operating temperature0~60℃
Working humidity90% non-condensing
Installation method35mm rail installation
Electromagnetic Compatibility2014/30/EU
Anti-vibration4.5mm/30Hz/10Min
ESD6KV
Factory agingThe 60-degree aging box runs for 168 hours, and the power is turned on and off 500 million times
Communication stabilityContinuous communication with PLC for 30 days, 130 million times of communication with 0 errors
CertificationCE Certification
Dimensions (LWH)90*24*65mm
Weight100g

Leave a Comment