BCNet-XJ is an Ethernet communication processor, which is designed to meet the increasing informatization requirements of factory equipment (equipment network monitoring and production management). Network data collection is very convenient to build a production management system.
BCNet-XJ adopts a modular design and comes with a communication line. It does not occupy the PLC programming port, that is, while the programming software/host computer software monitors the PLC data through the Ethernet, the touch screen can communicate with the PLC through the multiplexing interface X2.
BCNet-XJ features
- Installed on a 35mm guide rail, the COM1 port is directly connected to the MD8 programming communication round port of XJ, and a COM2 port is extended for touch screen communication. BCNet-XJ can directly obtain power from the PLC programming communication port, or external 24VDC power supply.
- Integrate a WEB server, through the web page, you can set device parameters and run diagnostics, and set a login protection password to prevent tampering with configuration data.
- Automatically match PLC and HMI serial parameters without additional configuration.
- Realize the Ethernet communication with Xinjie programming software XCPPro, read/write the program (including the write function in RUN)/comparison through the Ethernet, and monitor the operation of the programmable controller.
- It supports Xinjie Ethernet protocol communication, and can read/write device data to the programmable controller through the host computer system. After selecting the Xinjie Ethernet driver through the host computer software, it is convenient and quick to access.
- Integrate ModbusTCP server, support FC1, FC2, FC3, FC5, FC6, FC16, and the Modbus data area corresponds to the device address of Xinjie PLC.
- By using ModbusTCP communication protocol or port mapping, high-level language (such as VB, VC, C#, etc.) can be used to program, realize data communication with Xinjie PLC, and facilitate the development of production management systems.
- It can realize XCPPro, BCNetTCP transparent transmission, and ModbusTCP connection methods, allowing 6 PCs to collect PLC data at the same time, and the connection protocol method can be used arbitrarily.
- Support firmware update on the user side through Ethernet, provide firmware with more functions for free, purchase hardware once, and upgrade permanently.
Application
Technical Parameter
| Product number | BCNet-XJ |
|---|---|
| Describe | Xinjie PLC Ethernet Communication Processor |
| Color | Metallic Black |
| Status Display | Pwr，COM1，COM2，Link |
| Ethernet interface Interface Type Transmission rate Protocol support | IEEE 802.3 compatible, Link/Active indicator, line sequence adaptive, support Auto-MDIX RJ45 female socket 10/100Mbps XCPPro、ModbusTCP、BCNetTCP |
| Number of TCP connections | 6 |
| X1 interface (connected to PLC) Interface Type Transmission rate Protocol support | RS232 MD8 communication female port 9.6K, 19.2K, 38.4K, 57.6K, 115.2Kbps XJ programming port (COM1 port) |
| X2 interface (with HMI) Interface Type Transmission rate Protocol support | RS232 MD8 communication female port 9.6K, 19.2K, 38.4K, 57.6K, 115.2Kbps XJ programming port (COM1 port) |
| Configuration Software OPC software | XCCPro Kingview, 3D Force Control, etc. KepWare OPC |
| Diagnostics and Parameter setting | IE browser, default 192.168.1.178, BCDevice |
| Power supply Voltage type | Communication port to get power or External 24VDC 24VDC/100mA |
| Operating temperature | 0~60℃ |
| Working humidity | 90% non-condensing |
| Installation method | 35mm rail installation |
| Electromagnetic Compatibility | 2014/30/EU |
| Anti-vibration | 4.5mm/30Hz/10Min |
| ESD | 6KV |
| Factory aging | The 60-degree aging box runs for 168 hours, and the power is turned on and off 500 million times |
| Communication stability | Continuous communication with PLC for 30 days, 130 million times of communication with 0 errors |
| Certification | CE Certification |
| Dimensions (LWH) | 90*24*65mm |
| Weight | 100g |