1. ETH-iBUS is a convenient product that can be used without any work in the S7-200PLC. 2. ETH-iBUS can be directly connected to WinCC [selected driver is TCP/IP (auto) – Siemens comes with] without using PC ACCESS [OPC mode], high communication reliability 3. Q, I, M, DB1 in WinCC (remember: DB1) corresponds to Q, I, […]
Category: PLC Cable
ETH-PPi Ethernet Converter
ETH-PPI=CP243i+wincc Direct connection function (ie no PC ACCESS). It enables you to connect to the S7-200 with the driver [TCP/IP(auto)] that comes with WinCC. It is simple and convenient to use in engineering applications.Reduces communication instability caused by the use of OPC [PC ACCESS]! I, Q, M, DB1 (remember to be DB1) in WinCC correspond […]
ETH-PPi Ethernet Converter
Ethernet to PPI module = CP243i+wincc direct connection function (ie PC ACCESS is not used). It allows you to connect to the S7-200 with the driver [TCP/IP(auto)] that comes with WinCC. It is simple, convenient and practical to make the engineering application complex. Reduces communication instability caused by the use of OPC (ie PC ACCESS)! […]
WIFI ETH-MPI Ethernet Converter
Settings windows 7 32bit 1: Receive wireless signal and enter the password. Connected to the wifi signal Wifi signal name: wifi ETH-MPI/DP Connection password: 12345678 2: Set the IP address and gateway of the computer’s wireless network card (IPV4) to IP: 192.168.1.150 Subnet mask: 255.255.255.0 Gateway: 192.168.1.1 3: Open the STEP7 software. Set the PG/PC interface——–ETH-AUTO—–Attributes,Enter the IP address of the ETH-MPI converter […]
USB-CIF02
USB- CIF02:USB interface Omron series PLC programming cable,with communication indicator,cable connection between CQM1,CPM1, CPM1A, CPM2A,C200HS,C200HX/HG/HE,SRM1 series PLC and the computer. After connected with CS1W-CN114 cable,it can also be connected with CS/CJ,CQM1H and CPM2C series PLC. 3 Meters Introduction USB-CIF02 programming cable simulates USB port as traditional serial port (usually COM3).The working power supply of this […]