Plug-in terminals for ease of wiring and maintenance
Compact dimensions (H) 90 mm x (D) 60 mm DIN rail mounting
Built-in high speed counters up to 100 – 200 kHz (model dependant)
Dual communication ports RS232 and RS485 MODBUS ASCII/RTU compatible
Program language: (IL) instruction list, (LD) ladder diagram, (SFC) sequential function chart
SV2 series high performance PLC
SV2 series high-end PLC providing larger program capacities and data registers for more demanding, complex applications. Increases many motion control instructions to meet high-speed applications, high-precision positioning control for labelling, packaging and printing machines.
Item Number: DVP28SV11T2 Brand: Delta Products Item Category:Programmable Logic Controllers Series: SV2 Number of Inputs & Type: 16 – Digital Number of Outputs & Type: 12 – Transistor Expandable: Up to 480 I/O Points Display Type: I/O Indicator LEDs Approvals: UL;CE H x W x D: 3.54 in x 2.36 in x 2.09 in
Drop-off European terminal block (distance between endpoints: 5MM)
When the power supply slowly rises to 95~100VAC, the PLC starts to move, and when the power supply drops slowly to 70VAC, the PLC stops its action. The power supply will continue to run within 10MS of instantaneous power failure.
*1 Non-latched area, cannot be changed *2 The latched area cannot be changed *3 COM1 is the built-in RS-232 communication port, COM2 and COM3 are the built-in RS-485 communication ports *4 When the number of digital input expansion X points is extended to 256 points, the output Y can only use 16 points. On the contrary, when the output Y points are extended to 256 points, the input X can only use 16 points. *5 This area will be valid only when the host is connected to an analog module, and each connected analog module will occupy 10 points
Power-off hold action
Power OFF→ ON
M1031 non-maintained areas are all cleared
M1032 power failure retention area is all cleared
Factory setting value
Non-power failure retention
When M1033 is OFF, clear When M1033 ON, no change
power failure retention
Special M, Special D indirectly designated register
This programmable logic controller uses industrial-grade 32-bit MCU with strong anti-interference and faster speed.
The PLC board directly uses GX programming software for ladder diagram, written to the PLC directly, can monitor online.
It supports super encryption, as long as input password under PLC state, there is no read function.
Stable and reliable performance, build-in watchdog timer circuit, effectively ensures module long time work.
Widely used in all kinds of industrial automatic control, such as metallurgy, chemical, plastics, textile, food, packaging, printing, building materials, carpentry, central air conditioning, environmental protection equipment and industrial single process control equipment in industrial assembly line, various kinds of machine tools.
*Input high speed pulse C235,C238,C251,C253 function compatible with FX1N. *Y0 Y1 can send maximum 10K pulse, function compatible with FX1N.
When using WORK2 and GX, the baud rate must be set to 9.6K, otherwise communication will not be possible
Some customers respond that downloading programs is slow. The length of the download program is 8000 steps by default. Actually, most of the programs written by customers will not exceed 2000 steps, so you can set it in the software in GX or WORK2. Download speed increased by 4 times
How to set
After clicking the + sign in front of the parameter in the program data list, the PLC parameter will appear, and then double-clicking the PLC parameter, the parameter setting interface will appear. In the parameter setting interface, set the memory capacity from 8000 to 2000.
FX1N PLC series has 2 independent 232 serial ports (1,232 level 9pin port (2:TXD 3:RXD 5:GND)2, TTL level 4pin port (1:GXD 2:TXD 3:RXD 4:5V) ), both ports are programmable and connected to the touch screen. When programming, the 9pin port selects the USB-232 line; The 4pin port uses a USB-TTL cable. When connecting the touch screen, the 232 level 9pin port is directly connected to the touch screen with a DB9 male-to-female cable (actually only 3 wires are used, 2-2, 3-3, 5-5). The TTL level 4pin port needs to use our company’s TTL to 232 conversion board to convert to 232 level before it can be connected to the touch screen.
1,After powering on, click online-remote operation 2,Stop PLC [RUN changed to STOP] 3,Click to execute, the running light [RUN] on the circuit board will go out after execution, enter the keyword 4,New login keyword-input 11111111 and confirm. After encryption, only upload Program
Because the pathname of the installer folder is too long installation processing is discontinued.Please move the installer folder to the place which the pathname becomes 100 or less letters and execite setup.exe once again.
such as D:/asdfadsfdsafdsafsad/gx-develp/. is folder is too long, D:/gx-develp is short.