HJ1000 Series Hardware Manual V1.5
Hardware parameters
RS485 Parameters
| Port | 1 |
| Baud rate | 400K |
| Data bits | 8 Bits |
| Stop bit | 1 Bits |
| Check | None |
| Buffer | 4MBytes |
| Interface | Terminal(LINK-TX/LINK-RX) |
Digital input
| Number of channels | Determined by model |
| Input type | Optical isolation PNP/NPN |
| Rated voltage | 24V |
| Access method | Single line |
| Response time | 1 ms |
| Protect | Overcurrent and overvoltage |
Digital output
| Number of channels | Determined by model |
| Output type | PMOS tube output |
| Rated voltage | 25V |
| Output current | 0.5A |
| Response time | 1 ms |
| Protect | Overcurrent and overvoltage |
Analog input
| Number of channels | Determined by model |
| Input type | 0~20mA/0~5V/0~10V(Optional) |
| Precision | 0.1% |
| Sampling time | 1 ms |
| Input resistance | 50R(current)/1M ohm(voltage) |
| Protect | Overcurrent |
Analog output
| Number of channels | Determined by model |
| Output type | 0~20mA/0~5V/0~10V(Optional) |
| Precision | 0.1% |
| Sampling time | 1 ms |
| Output impedance | 50R(current)/100R(voltage) |
| Protect | Overcurrent |
Address encoding
| Address bits | 6 |
| Address sequence | 1、2、3、4、5、6 |
Terminal wiring diagram
HJ1000P Terminal
HJ1002 Terminal/LED Diagram
HJ1003 Terminal/LED Diagram
HJ1006 Terminal/LED Diagram
HJ1009A Terminal/LED Diagram
HJ1009B Terminal/LED Diagram
HJ1009C Terminal/LED Diagram
HJ1009D Terminal/LED Diagram
HJ1009E Terminal/LED Diagram
HJ1009F Terminal/LED Diagram
HJ1009G Terminal/LED Diagram
HJ1009H Terminal/LED Diagram
HJ1009I Terminal/LED Diagram
HJ1009P Terminal/LED Diagram
HJ1009K Terminal/LED Diagram
Wiring diagram
IO expansion module Hardware connection
Digital output (PNP)
Digital input
Analog 4-20mA current input
Analog 0~10V input
Analog 4-20mA output
Analog 0-5V or 0-10V output
Temperature input PT100/PT1000
K-type thermocouple wiring method
