Durable 0.4 m adapter cable converting RJ45 HSP5 port to D‑SUB9 for KEB drives—essential for diagnostics and programming.
Product Overview
The KEB 00.F5.0C0‑0020 is a 100 mm adapter cable that links a drive’s HSP5 RJ45 diagnostic interface to a standard D‑SUB9 connector. It provides proper voltage adaptation so your PC or programming tool can safely access inverter parameters via COMBIVIS software. Built for industrial conditions, it ensures reliable communication with KEB Combivert F5 series drives for monitoring, parameterization, and troubleshooting.
How to Use
- Identify the HSP5 RJ45 diagnostic socket on your KEB drive.
- Plug the RJ45 end of the adapter into this port.
- Attach the D‑SUB9 end to your HSP5 cable (part 00.F5.0C0‑0010) or directly to your PC/RS‑232 converter.
- Launch KEB COMBIVIS 5 software and select the correct serial port for diagnostics.
- Read or write parameters as needed.
Tip: Always use the dedicated HSP5 cable + adapter combination to avoid interface damage.
Frequently Asked Questions (FAQ)
- What is 00.F5.0C0‑0020?
An adapter converting RJ45 HSP5 diagnostic port to D‑SUB9. - How long is the cable?
Approximately 100 mm. - Which drives is it for?
KEB Combivert F5 series with HSP5 interface. - Do I need another cable?
Yes, pair with HSP5 cable (00.F5.0C0‑0010) for PC connection. - Can I connect directly to a PC RS‑232 port?
Only through the proper HSP5 cable and adapter to ensure voltage adaptation. - Is it industrial grade?
Yes, it’s built for automation environments. - What software to use?
KEB COMBIVIS 5. - Will it fit other brands?
No, it’s specifically for KEB HSP5 interface. - Warranty?
Depends on vendor—check at point of purchase. - How much does it cost?
List price around $30 from AIENSN; reseller prices vary.
User Review Summary
AIENSN listings on Amazon show buyers appreciate the build quality and straightforward compatibility with KEB inverters. Some note clear instructions from seller support but watch for shipping times from China sellers.
Comparison with Competing Products
AIENSN 00.F5.0C0‑0020 vs. OEM KEB Adapter
• Price: AIENSN ~$30 vs. OEM ~€35–45
• Availability: AIENSN via Amazon/global e‑commerce; OEM via automation distributors
• Build: Both meet spec; OEM may carry warranty from KEB.
Technical Specifications
Connector A: RJ45 HSP5 male
Connector B: D‑SUB9 female
Length: 0.1 m (100 mm)
Compatibility: KEB COMBIVERT F5 series drives
Construction: Industrial‑rated cable and molded connectors
Brand or Manufacturer Info
KEB Automation (Germany) specializes in drive and motion‑control systems for over 30 years, known for robust inverters, servo systems, and modular communication solutions.
Purchase Recommendations
AIENSN Store: 00.F5.0C0‑0020 RJ45 to D‑SUB9 Data Communication Cable