MPI DP PPI Ethernet Connector Module

ETH-MPI/DP

ETH-MPI/DP is an Ethernet converter for the S7-300 series, easy to use, completely transparent to the user, without adding any program in the host computer and PLC, and can be used immediately after installation.

It converts MPI / DP protocol to TCP / IP protocol, so that it can realize long-distance, high-speed (up to a maximum of 1.5 m) communication and support various well-known host software (such as WinCC and Kingview, force control InTouch, keyserver Ex), and can be simultaneously connected with STEP7 programming with Siemens S7-300.

Features similar to the SIEMENS Ethernet communication processor CP343-1 can replace the SIEMENS CP5611, CP5613, and CP5512 communication card, and the SIEMENS Adapter PC programming adapter.

  • Support STEP7, WinCC in WinXP, Win7 32/64-bits
  • Up to 2 TCP connections.
  • Support the TIA portal platform.
  • Don’t support Modbus TCP

Request a quote

ETH-PPI

ETH-PPI is an Ethernet converter for the S7-300 series, easy to use, is completely transparent to the user, without adding any program in the host computer and PLC, and can be used immediately after installation.

It converts the PPI protocol to TCP / IP protocol so that it can realize long-distance high-speed (up to a maximum of 187.5kbps) communication with Up to 2 TCP connections.

Support various well-known host software (such as WinCC and Kingview, force control InTouch, keyserver Ex),

Can be simultaneously connected with MicroWIN programming with Siemens S7-200.

Features similar to the SIEMENS Ethernet communication processor CP243-1 can replace USB-PPI, CP243-1.

NET-S7 

It converts PPI/MPI/DP protocol to TCP / IP protocol, so that it can realize long-distance, high-speed (up to a maximum of 1.5 m) communication and support various well-known host software (such as WinCC and Kingview, force control InTouch, keyserver Ex), and can be simultaneously connected with STEP7 programming with Siemens S7-300.

Features similar to the SIEMENS Ethernet communication processor CP343-1 can replace the SIEMENS CP5611, CP5613, and CP5512 communication card, and the SIEMENS Adapter PC programming adapter.

  • Support S7-200/300/400
  • PPI/MPI/DP protocol
  • Support STEP7, WinCC in WinXP, Win7 32/64-bits
  • Support SCADA and OPC communication.
  • Support TIA portal platform, 
  • Build-in Modbus TCP server 
  • Up to 32 TCP connections.

NET-S7-WIFI

It converts PPI/MPI/DP protocol to TCP / IP protocol, so that it can realize long-distance, high-speed (up to a maximum of 1.5 m) communication and support various well-known host software (such as WinCC and Kingview, force control InTouch, keyserver Ex), and can be simultaneously connected with STEP7 programming with Siemens S7-300.

Features similar to the SIEMENS Ethernet communication processor CP343-1 can replace the SIEMENS CP5611, CP5613, and CP5512 communication card, and the SIEMENS Adapter PC programming adapter.

  • Support Siemens S7-200,S7-200CN, S7-300
  • Build in WiFi module, default as AP mode.  Wireless transmission distance is about 100 meters in open space.
  • PPI/MPI 9600~187.5kbps, DP 1.5Mbps
  • Support STEP7, WinCC in WinXP, Win7 32/64-bits, Win8 Win10 32/64-bits
  • Support SCADA and OPC communication.
  • Support the TIA portal platform
  • Build-in Modbus TCP server 
  • Support WinCC directly (no need for OPC)
  • Up to 20 TCP connections.
  • DIN35 rail mounting

Leave a Comment