BCNet-FP is a Panasonic PLC Ethernet communication processor, suitable for Panasonic FP-XH, FP-X, FP-X0, FP0, FP0R, FP2SH and other series of PLCs. Write communication program in PLC;
Application requirements Siemens SMART LINE touch screen is connected to Panasonic PLC through serial port. The communication speed is too slow. When the amount of data is large, the delay of screen switching and data update is too large. This article provides Siemens SMART LINE touch screen to quickly connect Panasonic PLC solution via Ethernet. … Read more
The BCNet module integrates the ModbusTCP communication server, which realizes the direct correspondence between the Modbus protocol address and the memory address of the Omron PLC. The realized function numbers include: FC1, FC2, FC3, FC5, FC6, FC15 and FC16. (Take Siemens WINCC software and Omron CP1H series PLC as examples, communication module BCNet-CP)
BCNet-FX supports Mitsubishi programming software GX Works2 for program uploading and monitoring of the full range of FX PLCs via Ethernet, and with the remote module, program maintenance and data acquisition of remote devices can be conveniently realized.
Schneider Quantum PLC needs to communicate with Siemens S7300, S7200 and other PLCs. In this paper, we realize modbusTCP communication connection between Siemens S7300 PLC (PROFINET) and Schneider Quantum PLC through BCNet series gateway.