ihm op320a | XuePLC.com

OP320-A

July 16, 2022January 12, 2021 by chinaplc

This article introduces the usage and programming software of man-machine interface OP320-A.

FAQ-BCNet
Frequently Asked Questions about BCNet Series Products
Panasonic FP series PLC Ethernet modbusTCP communication
BCNet-FP is a Panasonic PLC Ethernet communication processor, suitable for Panasonic FP-XH, FP-X, FP-X0, FP0, FP0R, FP2SH and other series of PLCs. Write communication program in PLC;
Siemens SMART LINE touch screen Ethernet connection Panasonic PLC
Application requirements Siemens SMART LINE touch screen is connected to Panasonic PLC through serial port. The communication speed ... Read more
Omron PLC connects WINCC communication
The BCNet module integrates the ModbusTCP communication server, which realizes the direct correspondence between the Modbus protocol address and the memory address of the Omron PLC. The realized function numbers include: FC1, FC2, FC3, FC5, FC6, FC15 and FC16. (Take Siemens WINCC software and Omron CP1H series PLC as examples, communication module BCNet-CP)
Omron CP/CJ Communication Based on BCNet
Through the PLC bus protocol analysis function of BCNet-CP/CJ-S, the current Omron PLC data flow can be analyzed, and the current reading behavior and writing behavior of the touch screen can be detected. Combined with the panel information of the touch screen, the PLC can be obtained. Important point table information.