XCNet-PN-S(Siemens S71200/1500, wireless)

XCNet-PN-S is a high-performance protocol conversion gateway, designed to meet the increasing informatization requirements of factory equipment (equipment network monitoring and production management), and is used for Siemens PLCs with Ethernet interfaces (S7-1200/ 1500, S7-300PN, S7200 SMART, etc.), Siemens Ethernet module (CP243-1, CP343-1, etc.) Ethernet data acquisition, very convenient to build a production management system. The module integrates WiFi function, supports AP mode, STA mode and AP+STA mode, which is very convenient to build WiFi network, PLC programming, data acquisition, data exchange and cross-network segment access directly through WiFi.
The LAN1/LAN2/WiFi of XCNet-PN-S has the function of cross-network segment, which can convert the S7TCP protocol of the LAN1 port into the ModbusTCP protocol and BCNetS7 protocol of the LAN2/WiFi interface, and the LAN2/WiFi supports the ModbusTCP master-slave communication function.

XCNet-PN-S function

  1. Installed on a 35mm guide rail, LAN1 is a four-port RJ45 with switch function, and this port is connected to PLC; LAN2 is a single-port RJ45, which can be connected to a touch screen or a host computer system; WiFi external high-gain antenna can be connected to the host computer ; XCNet external 24VDC power supply.
  2. Integrated WiFi function, support AP mode, STA mode and AP+STA mode.
  3. PLC programming, data acquisition, data exchange and cross-network segment access can be performed through WiFi.
  4. Integrate a WEB server, which can set device parameters and run diagnosis through the web page; it can also be configured through the BCDevice tool; it can be configured arbitrarily from the LAN1/LAN2 interface or WiFi.
  5. Implement NAT function, the module can be configured with 4 groups of forwarding ports, each group of forwarding ports can have multiple TCP or UDP connections;
  6. The SmartIE series touch screen can be connected to PLCs such as S7-1200 and S7-1500.
  7. The LAN2/WiFi interface can support the ModbusTCP server function, and the PLC connected by the LAN1 port can be mapped to the ModbusTCP server of the LAN2/WiFi interface.
  8. The LAN2/WiFi interface can realize TCP client, based on ModbusTCP or S7TCP protocol, realize data exchange between PLCs, and ModbusTCP instrument data reading.
  9. The LAN2/WiFi interface can support the BCNetS7 protocol server function, which can map the PLC connected to the LAN1 port into the BCNetS7 protocol server of the LAN2/WiFi interface.
  10. The LAN2/WiFi interface can support up to 32 host computer access.
  11. SCADA (upper configuration software) supporting OPC channel communicates with PLC in OPC mode.
  12. Support firmware update on the user side through Ethernet, one purchase, permanent upgrade.

Application

Technical Parameter

Product numberXCNet-PN-S
DescribeSiemens S71200/1500 PLC Ethernet Communication Processor
ColorMetallic Black
Status DisplayPwr,LAN1,LAN2,WiFi
WiFi interface
Interface Type
transmit power
Receive sensitivity
Wireless type
Security Mechanism
Protocol support
number of connections
802.11 b/g/n 2.4G-2.5G
External high gain antenna
+26dBm(MAX,2.4G 802.11b/g/n)
-89dBm(802.11b), -74dBm(802.11g), -72dBm(802.11n)
Station/AP mode
WPA-PSK/WPA2-PSK/WEP
TCP/IP, UDP/IP, S7TCP, ModbusTCP, BCNetS7
up to 32
LAN1 interface (connected to PLC)
Interface Type
Transmission rate
Protocol support
number of connections
Link/Active indicator, automatic polarity crossover
RJ45 female socket*4
10/100Mbps
TCP/IP, UDP/IP, S7TCP, ModbusTCP, BCNetS7
up to 32
LAN2 interface (connected to the host)
Interface Type
output rate
Protocol support
number of connections
Link/Active indicator, automatic polarity crossover
RJ45 female socket
10/100Mbps
TCP/IP, UDP/IP, S7TCP, ModbusTCP, BCNetS7
up to 32
Configuration Software
OPC software
Portal V14
Kingview, 3D Force Control, etc.
KepWare OPC
Diagnostics and Parameter settingIE browser, default 192.168.1.188, BCDevice
Power supply
Voltage type
Communication port to get power or External 24VDC
24VDC/100mA
Operating temperature0~60℃
Working humidity90% non-condensing
Installation method35mm rail installation
Electromagnetic Compatibility2014/30/EU
Anti-vibration4.5mm/30Hz/10Min
ESD6KV
Factory agingThe 60-degree aging box runs for 168 hours, and the power is turned on and off 500 million times
Communication stabilityContinuous communication with PLC for 30 days, 130 million times of communication with 0 errors
CertificationCE Certification
Dimensions (LWH)115*27*75mm
Weight150g

Leave a Comment